Replacement Parts Archives - PocketWizard

Plus IIIe Reinforcement Plate

Heather Simons — Fri, 04 Nov 2022 16:16:55 +0000

If you are constantly plugging and unplugging cables into your Plus III’s sync or USB port, you may want to give it a little extra protection to save wear and tear on the parts. This 3D printed reinforcement will sit right on the radio’s main board to give both ports more protection.

You can install the part yourself if you’re comfortable with minor repairs, take a look at the video below for details. Once you take the back off, take out the screw holding the board to the case. Press the reinforcement into place then use the new longer screw to hold it to the board. Replace the back cover and you’re as good as new!

If you’d rather send it in, please contact us.
One note: There is a metal hinge pin for the door that can slip down. If you are having a hard time snapping the unit back together, slide the hinge pin all the way up then try again.

The post Plus IIIe Reinforcement Plate appeared first on PocketWizard.

Replacement Part: Battery Door for Plus II or MultiMAX

Heather Simons — Mon, 19 Oct 2020 16:06:05 +0000

A replacement door for the older Plus, Plus II, and original MultiMAX units.

Please take a look at the video here to see how to take the radio apart so you can replace the door.

The post Replacement Part: Battery Door for Plus II or MultiMAX appeared first on PocketWizard.

Replacement Lanyard Loop for Plus and MultiMAX Radios

Jie Zhu — Fri, 15 May 2020 07:50:58 +0000

Did the little loop that holds your lanyard break? Never fear, it can easily be replaced! Loosen one screw and you can remove the broken piece and replace it with a new lanyard loop.

Compatible with all MultiMAX radios, Plus II, Plus Receiver, and Plus Transmitter.

The post Replacement Lanyard Loop for Plus and MultiMAX Radios appeared first on PocketWizard.

Replacement Mini-B to USB Cable

Jie Zhu — Fri, 15 May 2020 07:48:33 +0000

PocketWizard radios run on firmware that is updated as new products come out or new features are added. To update your radios, you will need to connect them to the PocketWizard Utility program and use a Mini B to USB data cable.
Note: these cables can be sold as either data or power only cables, if you purchase one elsewhere, be sure it can transmit data.

How to use:
Download the PocketWizard Utility program onto your computer. Open the program and connect your radio to update or upgrade your firmware. Please see the Getting Started page of the PocketWizard Wiki for detailed instruction.

Specifications:
From USB Type A Male to Mini-B Male
Length: 3′

The post Replacement Mini-B to USB Cable appeared first on PocketWizard.

Replacement Shoe for AC5 SoftShield or AC7 Hard Shield

Jie Zhu — Fri, 15 May 2020 07:37:37 +0000

This is a replacement ferrite filtering shoe ONLY for the AC5 SoftShield or AC7 Hard Shield.

It cannot be used without the fabric shield or housing and is not a replacement for a FlexTT5/FlexTT6 standard hot shoe.

The post Replacement Shoe for AC5 SoftShield or AC7 Hard Shield appeared first on PocketWizard.

Replacement Release Button for AC3 ZoneController

Jie Zhu — Fri, 15 May 2020 07:32:49 +0000

Replacement release button for AC3 ZoneController. If you need help removing a stuck AC3 from your radio, please contact us at info@pocketwizard.com.

To replace a missing release button, simply slide the part in the slot with the open section facing down. See photo for sample. The release button will work either with or without the spring.

The post Replacement Release Button for AC3 ZoneController appeared first on PocketWizard.

Replacement Ribbon Cable

Jie Zhu — Fri, 15 May 2020 11:18:30 +0000

A replacement ribbon cable for the MiniTT1, FlexTT5, or FlexTT6 hot shoe. Please see attached photo for proper alignment of ribbon cable when replacing the shoe. Contact us at info@pocketwizard.com for assistance with ribbon cable replacement.

The post Replacement Ribbon Cable appeared first on PocketWizard.

Replacement Rubber Pin Cover and Lanyard for PowerMC2

Jie Zhu — Fri, 15 May 2020 07:12:18 +0000

Replacement rubber pin cover for the contacts on your PowerMC2. Comes with a lanyard.

The post Replacement Rubber Pin Cover and Lanyard for PowerMC2 appeared first on PocketWizard.

Replacement Foot Piece for HSFM3 Cable

Jie Zhu — Fri, 15 May 2020 01:33:02 +0000

Did the hot shoe on your HSFM3 break? We designed the part to be user-replaceable so you don’t have to buy a new cable. Kit includes 4 screws and washers, plus replacement shoe.

The post Replacement Foot Piece for HSFM3 Cable appeared first on PocketWizard.

Replacement Cable for AC9 AlienBees Adapter

Heather Simons — Mon, 11 May 2020 23:33:42 +0000

A replacement RJ-14 (phone jack style) connector cable. Connects the AC9 AlienBees adapter to your White Lightning or AlienBees strobe. Approximately 8″ long.

The post Replacement Cable for AC9 AlienBees Adapter appeared first on PocketWizard.