Wireless Triggering Systems For Photography | PocketWizard https://pocketwizard.com/shop/ MAKE IT POSSIBLE Sat, 14 Nov 2026 21:26:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.12 https://i0.wp.com/pocketwizard.com/wp-content/uploads/2020/03/cropped-RadioWaves_store_c6160bf0-4048-48c1-9656-ac923651be54.png?fit=32%2C32&ssl=1 Wireless Triggering Systems For Photography | PocketWizard https://pocketwizard.com/shop/ 32 32 178690905 Replacement Battery for Plus Ve https://pocketwizard.com/products/replacement-battery-for-plus-ve/?utm_source=rss&utm_medium=rss&utm_campaign=replacement-battery-for-plus-ve https://pocketwizard.com/products/replacement-battery-for-plus-ve/#respond Fri, 30 Oct 2026 21:40:38 +0000 https://pocketwizard.com/?post_type=product&p=17046 Replacement lithium-ion battery for the PocketWizard Plus Ve. To replace the current battery, use a small Phillips screwdriver to remove the screw on the battery cover. Take off the battery cover. Slide the battery out of the body. You’ll notice it’s connected to a little white box in the upper left corner. Pull the cable […]

The post Replacement Battery for Plus Ve appeared first on PocketWizard.

]]>
Replacement lithium-ion battery for the PocketWizard Plus Ve.

To replace the current battery, use a small Phillips screwdriver to remove the screw on the battery cover. Take off the battery cover. Slide the battery out of the body. You’ll notice it’s connected to a little white box in the upper left corner. Pull the cable near the white box gently but firmly to unhook the battery.

To replace it, slide the white connector piece on the new battery into the white receptor box and make sure they are aligned correctly. You will notice a raised line on the connector piece, that should be facing up. Push the connector into the receptor box until it stops. You may need to bend the wires a little to get the correct angle. Slide the battery into the body of the radio. Replace the back cover by inserting the bottom part of the battery cover first then pressing it closed. Replace the screw.

 

Specifications:
User replaceable, single cell, 3.7 volt, 800 mAh, rechargeable Lithium-Ion Polymer battery

Charged in unit via USB C charging port.

 

 

The post Replacement Battery for Plus Ve appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/replacement-battery-for-plus-ve/feed/ 0 17046
Replacement Charger Cable for Plus Ve https://pocketwizard.com/products/replacement-charger-cable-for-plus-ve/?utm_source=rss&utm_medium=rss&utm_campaign=replacement-charger-cable-for-plus-ve https://pocketwizard.com/products/replacement-charger-cable-for-plus-ve/#respond Fri, 30 Oct 2026 21:15:49 +0000 https://pocketwizard.com/?post_type=product&p=17044 Replacement or spare charger cable for your PocketWizard Plus Ve Transceiver. Simply connect the USB-A port to your computer or block to charge your Plus Ve radio. Specifications: From USB-C to USB-A Length: 36″ (90 cm)

The post Replacement Charger Cable for Plus Ve appeared first on PocketWizard.

]]>
Replacement or spare charger cable for your PocketWizard Plus Ve Transceiver. Simply connect the USB-A port to your computer or block to charge your Plus Ve radio.

Specifications:

From USB-C to USB-A

Length:

36″ (90 cm)

The post Replacement Charger Cable for Plus Ve appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/replacement-charger-cable-for-plus-ve/feed/ 0 17044
FlashWizard Tree https://pocketwizard.com/products/flashwizard-tree-2/?utm_source=rss&utm_medium=rss&utm_campaign=flashwizard-tree-2 https://pocketwizard.com/products/flashwizard-tree-2/#respond Tue, 08 Jul 2025 21:57:24 +0000 https://pocketwizard.com/?post_type=product&p=14765 The FlashWizard Tree allows you to mount multiple PocketWizard radios on one stanchion, perfect for triggering multiple remote cameras. The Tree itself is made of a durable non-metallic material and can mount to a magic arm or clamp. Add MB4 mounting bars and choose from 8 different positions for your remote cameras. You can purchase […]

The post FlashWizard Tree appeared first on PocketWizard.

]]>
The FlashWizard Tree allows you to mount multiple PocketWizard radios on one stanchion, perfect for triggering multiple remote cameras. The Tree itself is made of a durable non-metallic material and can mount to a magic arm or clamp. Add MB4 mounting bars and choose from 8 different positions for your remote cameras.

You can purchase the tree itself which includes 6 thumbscrews for keeping your MB4s locked in or as a whole kit which includes the tree, 6 thumbscrews, and 2 MB4 mounting bars.

The thumbscrews are also available separately as a 2 pack.

Size:
Tree: approximately 4″ in diameter x 2″ high
Thumbscrews: 1 1/2″ long x 1 1/4″ wide
MB4: 4 1/4″ long x 5/8″ wide

The post FlashWizard Tree appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/flashwizard-tree-2/feed/ 0 14765
Protected: Priority Shipping Upcharge https://pocketwizard.com/products/priority-shipping-upcharge/?utm_source=rss&utm_medium=rss&utm_campaign=priority-shipping-upcharge https://pocketwizard.com/products/priority-shipping-upcharge/#respond Mon, 02 Jun 2025 18:13:28 +0000 https://pocketwizard.com/?post_type=product&p=14610 There is no excerpt because this is a protected post.

The post Protected: Priority Shipping Upcharge appeared first on PocketWizard.

]]>

This content is password-protected. To view it, please enter the password below.

The post Protected: Priority Shipping Upcharge appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/priority-shipping-upcharge/feed/ 0 14610
E Release Upgrade for PocketWizard PlusX (FCC-US/Canada) *MAIL IN ONLY* https://pocketwizard.com/products/e-release-upgrade-for-pocketwizard-plusx-fcc-us-canada-mail-in-only/?utm_source=rss&utm_medium=rss&utm_campaign=e-release-upgrade-for-pocketwizard-plusx-fcc-us-canada-mail-in-only https://pocketwizard.com/products/e-release-upgrade-for-pocketwizard-plusx-fcc-us-canada-mail-in-only/#respond Thu, 19 Sep 2024 16:30:02 +0000 https://pocketwizard.com/?post_type=product&p=13320 The PocketWizard PlusX can now be upgraded to the E Release firmware protocol! Take advantage of the new technology and upgrade your PlusX radios! IMPORTANT: Please CONTACT US for information before making a purchase. Your PlusX radio(s) will need to be shipped to our corporate office for this upgrade. This is not an upgrade that […]

The post E Release Upgrade for PocketWizard PlusX (FCC-US/Canada) *MAIL IN ONLY* appeared first on PocketWizard.

]]>
The PocketWizard PlusX can now be upgraded to the E Release firmware protocol! Take advantage of the new technology and upgrade your PlusX radios!

IMPORTANT:
Please CONTACT US for information before making a purchase.

Your PlusX radio(s) will need to be shipped to our corporate office for this upgrade. This is not an upgrade that can be installed by the PocketWizard Utility, the PlusX does not have a USB port. This is available for FCC radios only, for customers in the US and Canada. You are responsible for shipping costs. Please be sure to contact us before placing your order.   

If  you order the upgrade for the PlusX at the same time as upgrades for other PocketWizard radios, your other upgrades WILL NOT be accessible immediately. You can upgrade them once the PlusX comes back. If you would like to upgrade the other PocketWizards immediately, please order the PlusX upgrade separately or contact us for information before placing the order.

The post E Release Upgrade for PocketWizard PlusX (FCC-US/Canada) *MAIL IN ONLY* appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/e-release-upgrade-for-pocketwizard-plusx-fcc-us-canada-mail-in-only/feed/ 0 13320
FCC PlusXe Transceiver 2-Pack https://pocketwizard.com/products/fcc-plusxe-transceiver-2-pack/?utm_source=rss&utm_medium=rss&utm_campaign=fcc-plusxe-transceiver-2-pack https://pocketwizard.com/products/fcc-plusxe-transceiver-2-pack/#respond Thu, 19 Sep 2024 15:33:46 +0000 https://pocketwizard.com/?post_type=product&p=13312 The PlusXe is the newest addition to our E Release family of radios. It functions exactly like our regular PlusX but adds the ability to use either the new E Release firmware protocol OR our tried and true Legacy firmware. This new radio is 100% backwards compatible with all PocketWizard enabled products as well as […]

The post FCC PlusXe Transceiver 2-Pack appeared first on PocketWizard.

]]>
The PlusXe is the newest addition to our E Release family of radios. It functions exactly like our regular PlusX but adds the ability to use either the new E Release firmware protocol OR our tried and true Legacy firmware. This new radio is 100% backwards compatible with all PocketWizard enabled products as well as the Raven by Fusion TLC. The best part is that you can switch between firmware versions right on the unit itself, no computer or program needed!

The PlusXe is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. How simple? Attach one PlusXe to your camera, another PlusXe to a remote flash using a flash sync cable, set both radios to the same channel, and start taking pictures. You can also trigger your camera remotely, just connect the appropriate remote camera cable.

NOTE: the PlusXe does NOT include cables. We want to protect the environment and instead of providing multiple cables that you don’t use that will eventually end up in the landfill, you can order the specific cables you need for your equipment. If you need help figuring out what cables you need, please see our cablefinder or contact us for assistance.

Features include:

  • 10 Standard Channels
  • Easy to Use
  • Remote Flash Sync
  • Remote Camera Triggering
  • Auto Relay Mode
  • PocketWizard Compatible with either Legacy OR E Release firmware

See more details on the PlusX Product Page or usage instructions at the PocketWizard Wiki.

The PlusXe 2 pack includes:
2 PlusXe radios
2 lanyards
Cables are sold separately

This is an FCC frequency radio which can only ship to an address within North America. 

The post FCC PlusXe Transceiver 2-Pack appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/fcc-plusxe-transceiver-2-pack/feed/ 0 13312
FCC PlusXe Transceiver https://pocketwizard.com/products/fcc-plusxe-transceiver/?utm_source=rss&utm_medium=rss&utm_campaign=fcc-plusxe-transceiver https://pocketwizard.com/products/fcc-plusxe-transceiver/#respond Thu, 19 Sep 2024 15:26:05 +0000 https://pocketwizard.com/?post_type=product&p=13306 The PlusXe is the newest addition to our E Release family of radios. It functions exactly like our regular PlusX but adds the ability to use either the new E Release firmware protocol OR our tried and true Legacy firmware. This new radio is 100% backwards compatible with all PocketWizard enabled products as well as […]

The post FCC PlusXe Transceiver appeared first on PocketWizard.

]]>
The PlusXe is the newest addition to our E Release family of radios. It functions exactly like our regular PlusX but adds the ability to use either the new E Release firmware protocol OR our tried and true Legacy firmware. This new radio is 100% backwards compatible with all PocketWizard enabled products as well as the Raven by Fusion TLC. The best part is that you can switch between firmware versions right on the unit itself, no computer or program needed!

The PlusXe is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. How simple? Attach one PlusXe to your camera, another PlusXe to a remote flash using a flash sync cable, set both radios to the same channel, and start taking pictures. You can also trigger your camera remotely, just connect the appropriate remote camera cable. The PlusXe is also available as a 2 pack.

NOTE: the PlusXe does NOT include cables. We want to protect the environment and instead of providing multiple cables that you don’t use that will eventually end up in the landfill, you can order the specific cables you need for your equipment. If you need help figuring out what cables you need, please see our cablefinder or contact us for assistance.

Features include:

  • 10 Standard Channels
  • Easy to Use
  • Remote Flash Sync
  • Remote Camera Triggering
  • Auto Relay Mode
  • PocketWizard Compatible with either Legacy OR E Release firmware

See more details on the PlusX Product Page or usage instructions at the PocketWizard Wiki.

The PlusXe includes:
1 PlusXe radio
1 lanyard
Cables are sold separately

This is an FCC frequency radio which can only ship to an address within North America. 

The post FCC PlusXe Transceiver appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/fcc-plusxe-transceiver/feed/ 0 13306
FCC Plus Ve Transceiver 2-Pack https://pocketwizard.com/products/plus-ve-transceiver-fcc-2-pack/?utm_source=rss&utm_medium=rss&utm_campaign=plus-ve-transceiver-fcc-2-pack Fri, 18 Aug 2023 18:08:51 +0000 https://pocketwizard.com/?post_type=product&p=11093 The FCC Plus Ve Transceiver is the most reliable, feature-packed, easy-to-use solution for remote flash and camera triggering available. It comes with PocketWizard’s enhanced firmware, the E Release, factory installed to deliver incredible range and enhanced reliability right out of the box for when you can’t miss a shot. You will need at least 2 radios, one to use as a transmitter to trigger and one to use as a receiver. Plus Ve are Auto-Sensing Transceivers and will automatically function as either a transmitter, a receiver, or both. This kit includes 2 Plus Ve radios and 2 charging cables.

The post FCC Plus Ve Transceiver 2-Pack appeared first on PocketWizard.

]]>
This product contains 2 radios.

While the Plus Ve Transceiver is the smallest form factor Plus product ever made, is also the most reliable, feature-packed, easy-to-use solution for remote flash and camera triggering available. With features like rechargeable battery, Long Range mode,color LCD display, six Zones to choose from, and Bluetooth upgradeable, the Plus Ve can help you take your photography to the next level.

Plus Ve Features:

  • Color LCD display
  • 32 E Release Channels
  • 80 Long Range Channels
  • Rechargeable Battery
  • 6 Zones with Every Channel
  • Easy to Use
  • Remote Flash Sync
  • Remote Camera Triggering
  • Auto Relay Mode
  • SAW filter for better noise reduction
  • Bluetooth Upgradeable (requires mobile app)

Important information: PocketWizard has two different firmware protocols. Plus Ve radios use our new E Release firmware and can be used with any other PocketWizard using the E Release firmware. The Plus Ve radios CANNOT be downgraded to use the Legacy firmware and is NOT backwards compatibility with older radios. Please see our firmware page for details.

See more details and features at the Plus Ve product info page and usage instructions at the PocketWizard Wiki.

The Plus Ve includes:
2 Plus Ve radios
2 USB-C charging cables
2 lanyards

This is an FCC frequency radio which can only ship to an address within the United States. 

The post FCC Plus Ve Transceiver 2-Pack appeared first on PocketWizard.

]]>
11093
PocketWizard Lanyard https://pocketwizard.com/products/pocketwizard-lanyard/?utm_source=rss&utm_medium=rss&utm_campaign=pocketwizard-lanyard https://pocketwizard.com/products/pocketwizard-lanyard/#respond Sun, 09 Apr 2023 21:27:46 +0000 https://pocketwizard.com/?post_type=product&p=9862 PocketWizard Lanyards are great for holding your badge, keys, maybe even your radio! Custom printed 5/8″ black polyester lanyard with white and blue PocketWizard logo screen printed on the outside. The lanyard has a J-Hook for attaching objects. Limited quantities available.

The post PocketWizard Lanyard appeared first on PocketWizard.

]]>
PocketWizard Lanyards are great for holding your badge, keys, maybe even your radio!

Custom printed 5/8″ black polyester lanyard with white and blue PocketWizard logo screen printed on the outside. The lanyard has a J-Hook for attaching objects.

Limited quantities available.

The post PocketWizard Lanyard appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/pocketwizard-lanyard/feed/ 0 9862
PocketWizard Transfer Sticker https://pocketwizard.com/products/pocketwizard-transfer-sticker/?utm_source=rss&utm_medium=rss&utm_campaign=pocketwizard-transfer-sticker https://pocketwizard.com/products/pocketwizard-transfer-sticker/#respond Sun, 09 Apr 2023 21:20:34 +0000 https://pocketwizard.com/?post_type=product&p=9860 Share the PocketWizard love! Add a favorite PocketWizard sticker to your water bottle, your car, or your hard camera case! This is a two color PocketWizard logo on a vinyl transfer sticker – each letter is individually die cut. Peel the back paper off, stick the sticker to the surface, rub/press to ensure a good […]

The post PocketWizard Transfer Sticker appeared first on PocketWizard.

]]>
Share the PocketWizard love! Add a favorite PocketWizard sticker to your water bottle, your car, or your hard camera case!

This is a two color PocketWizard logo on a vinyl transfer sticker – each letter is individually die cut.

Peel the back paper off, stick the sticker to the surface, rub/press to ensure a good seal, then carefully peel off the top clear layer.

Sticker is 6″ wide and 1 1/2″ high at the top of the radio waves.

Limited quantities available.

The post PocketWizard Transfer Sticker appeared first on PocketWizard.

]]>
https://pocketwizard.com/products/pocketwizard-transfer-sticker/feed/ 0 9860