Use either the MM1 or the MM3 for the Plus III, Plus IV, and PlusX radios.

For remotely triggering a flash equipped with a 1/8″ (3.5 mm) mono miniphone sync terminal.

Specifications:

From male 1/8″ (3.5 mm) mono miniphone to male 1/8″ (3.5 mm) mono miniphone

MM1 – 1′ (30 cm); straight cable, mono connection
Part #: 12014
UPC: 893577001101

MM3 – 3′ (91 cm) extended, 1′ (30 cm) closed; coiled cable; stereo connection
Part #: 11882
UPC: 893577001873

Note: The MM3 is a stereo cable and is for the Plus III or PlusX only.  Cannot be used to trigger an AlienBees flash from a FlexTT5/FlexTT6, MultiMAX, or Plus II. Use the MM1 instead.

The post MM1 / MM3 1/8″ (3.5mm) Flash Sync Cable appeared first on PocketWizard.

You can also use the PC cable connected to a camera or lens PC terminal one one end and to a transmitting PocketWizard radio (except MiniTT1 and FlexTT5/FlexTT6). These cables have a locking PC male terminal on one end and a 1/8″ (3.5 mm) mono miniphone on the other.

Specifications:

From 1/8″ (3.5 mm) mono miniphone to locking PC male terminal.  

PC1N; 1′ (30 cm) straight cable
Part #: 12288
UPC #: 850386005072

PC3N: 3′ (91 cm) coiled cable
Part #: 11741
UPC #: 893577001866

PC5N: 5′ (1.5 m) coiled cable
Part #: 11848
UPC #: 893577001415

The post Locking PC / Flash Sync Cable appeared first on PocketWizard.

For remotely triggering a flash equipped with a household style sync terminal. The HSFM3 should be able to trigger flashes with either 2 or 3 openings. 

Compatible with many flash models including: Comet, Norman, Speedotron, Dynalite, Novatron, Lumedyne, Quantum Q-Flash and Sunpak 120J, 555 & 622.

Specifications:

From 1/8″ (3.5 mm) mono miniphone to household style sync terminal.

MH1: 16″ (40 cm) straight
Part #: 12029
UPC #: 893577001095

MH3: 3′ (91 cm)  straight
Part #: 12028
UPC #: 893577001125

The post MH1 / MH3 Household Flash Sync Cable appeared first on PocketWizard.

For remotely triggering a flash equipped with a 1/4″ (6.35 mm) mono phono port. 

Compatible with many flash models including: Balcar, Bowens, White Lightning, Calumet, Norman, Profoto, Photogenic, Hensel, Dynalite Road, RoadMax or similar.

Specifications:

From 1/8″ (3.5 mm) mono miniphone to 1/4″ (6.35 mm) phono

MP1: 12″ (30 cm) straight
Part #: 12018
UPC #: 893577001064

MP3: 3′ (91 cm)  straight
Part #: 12019
UPC #: 893577001132

The post MP1 / MP3 Flash Sync Cable(s) appeared first on PocketWizard.

This cable should work on virtually any flash capable of a single pin trigger, with a standard hot shoe, including Sony’s Multi Interface shoe.

The HSFM3 can also be used with a PocketWizard radio or a Raven from Fusion TLC. For example, if you would like to use a BT1 to trigger a Raven, you can connect the Raven to the HSFM3’s hot shoe. Use a female to female miniphone adapter, then connect the BT1 to the adapter.

If you break the hot shoe foot for the HSFM3, you can order a replacement bottom foot and install the new part yourself.

HSFM3 Specifications:

For connecting a PocketWizard radio (excluding the MiniTT1) to remotely trigger any electronic flash via a standard hot shoe. 

From: 1/8″ (3.5 mm) mono miniphone
To: standard hot shoe.

Cable length: 3′ (91 cm) straight cable

Part #: 11481
UPC #: 850386005089

The post HSFM3 Flash Sync Cable appeared first on PocketWizard.

Using a remote camera lets you explore creativity and expand photographic coverage in unique ways. On location, remote cameras can be where you physically can’t. Get shots no one else can by firing a remote camera at the same time you fire your main body. Two images, two perspectives, one photographer! In the studio, get out from behind the lens and really connect with your subjects.

This cable can also be used as a regular sync cable to trigger a remote flash with a 2.5mm connection.

How to Use:

As a remote camera cable: Connect the CM-E3-ACC Remote Camera Cable to your camera’s remote port and a receiving PocketWizard radio. Trigger your remote camera by either pressing test on a handheld PocketWizard or directly from your camera’s shutter button; with the transmitting PocketWizard mounted on your handheld camera’ s hot shoe or connected to the camera’s PC port. More details can be found in our PocketWizard Wiki.

NOTE: If you are shooting from a hand held camera and triggering a remote camera at the same time, use a remote camera cable on both the transmitting and receiving radios for best results. With most mirrorless cameras, a second cable is required for settings such as silent shooting mode, electronic shutter, or continuous high speed drive, where the camera’s hot shoe may be disabled.

As a flash sync cable: Connect the CM-E3-ACC cable to your flash’s 2.5mm sync port and a receiving PocketWizard radio. Use a transmitting PocketWizard on your camera’s hot shoe or connected via the camera’s PC port to trigger the remote flash.

Compatibility:

PocketWizard Compatibility:
All PocketWizard transceivers
NOTE: For PocketWizards with mono sync ports such as older Plus, Plus II, and MultiMAX radios using top sync port, use an MSMM adapter or a PTMM adapter.

Camera Compatibility:
Canon cameras with E3 remote shutter release terminal including:
Canon SLR & DSLRs:
EOS SL series, EOS 60D, EOS 70D, EOS 77D, EOS 80D, EOS 90D, Rebel series, Digital Rebel series, EOS Rebel series, EOS 300D, EOS 350D, EOS 400D, EOS 450D, EOS 500D, EOS 550D, EOS 600D, EOS 650D, EOS 700D, EOS 1000D, EOS 1100D, EOS 1200D
Canon mirrorless:
EOS R, R6, R6, R6 II, R7, R10, and RP.
For EOS R5 and EOS R3, see the CM-N3-ACC. The EOS M50 series does not have an external remote port and cannot be triggered by a PocketWizard at this time.
Fuji, Olympus, and Pentax cameras:
This cable also may be compatible with most Fuji, Olympus, and Pentax cameras that can be triggered via a 2.5mm stereo connection.
Hasselblad H series, Contax 645 and N, Bronica ETR and SQA motor drive:
If your camera has a standard 2.5mm remote port with a tip, ring, & sleeve connection, this cable should be compatible, test your specific camera to confirm.
Panasonic and Leica:
These cameras have 2.5 mm remote ports that have extra contacts. This cable will not work with those cameras. For Panasonic cameras, please use the PAN-ACC cable. 

Flash Compatibility:
This cable can also be used as a flash sync cable for flashes with a 2.5mm subminiphone sync port.

Half press / Pre Trigger Options for Remote Camera Use:

Enabling half press with the radios will pre trigger the remote camera. When half press / pre triggering is enabled, the remote camera behaves as if you were half pressing the shutter button directly on the camera itself. When pre triggered, the remote camera will focus and confirm exposure but not fire. The advantage of the half press feature is that your camera will respond to the actual trigger signal faster, as it should be completely ready to take the photo as soon as it gets the signal to fire. Half press is available “on demand” with some PocketWizard radios as a feature. Continuous half press is available to all PocketWizard radios if you add a PTMM cable. Please see below for details:

Plus III: Using a hand held transmitting radio: half press the test button  on the radio in your hand to pre trigger your remote camera, then press all the way to take the photo. If you are shooting from a handheld camera with a hot shoe mounted transmitting radio, use a remote camera cable on both the transmitting and receiving PocketWizard radios to enable pre triggering for the remote camera. When you half press the shutter button of the camera in your hand, the remote Plus III should pre trigger the remote camera at the same time.

Plus IV: The Plus IV can receive a half press signal from a transmitting Plus III but cannot send one. See above for details about how half press works.

MultiMAX: You can pre trigger a remote camera using the MultiMAX radios by enabling or disabling their zones. This feature works when using the bottom -ACC port on a MultiMAX radio. It is not available on older MultiMAX radios that only have a top port.

The PTMM adapter can be added to any setup to enable constant pre triggering. It is an adapter that connects to the remote camera cable and has a box with a switch. When you turn it “on”, the camera will be constantly pre triggered. When it is “off”, the camera will fire after confirming focus and exposure. The camera will respond much more quickly but will use more battery power.

FlexTT5, FlexTT6, Plus II, Plus Receiver, MultiMAX without -ACC ports: half press /  pre trigger is only available on these units by adding the PTMM adapter.

Specifications:

From: 3.5 mm (1/8″) stereo miniphone (male)
To: Canon’s E3 remote terminal (female) or any compatible 2.5 mm (3/32″) sub miniphone sync port (female)

Cable lengths:
CM-E3-ACC: 3′ (91 cm)
CM-E3-ACC-1: 1′ (30.5 cm)

The post CM-E3-ACC 2.5mm Remote Camera / Flash Sync Cable appeared first on PocketWizard.