The PlusXe is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. How simple? Attach one PlusXe to your camera, another PlusXe to a remote flash using a flash sync cable, set both radios to the same channel, and start taking pictures. You can also trigger your camera remotely, just connect the appropriate remote camera cable.

NOTE: the PlusXe does NOT include cables. We want to protect the environment and instead of providing multiple cables that you don’t use that will eventually end up in the landfill, you can order the specific cables you need for your equipment. If you need help figuring out what cables you need, please see our cablefinder or contact us for assistance.

Features include:

• 10 Standard Channels
• Easy to Use
• Remote Flash Sync
• Remote Camera Triggering
• Auto Relay Mode
• PocketWizard Compatible with either Legacy OR E Release firmware

See more details on the PlusX Product Page or usage instructions at the PocketWizard Wiki.

The PlusXe 2 pack includes:
2 PlusXe radios
2 lanyards
Cables are sold separately

This is an FCC frequency radio which can only ship to an address within North America. 

The post FCC PlusXe Transceiver 2-Pack appeared first on PocketWizard.

The PlusXe is the simplest PocketWizard radio ever and the perfect entry into the PocketWizard Wireless System. How simple? Attach one PlusXe to your camera, another PlusXe to a remote flash using a flash sync cable, set both radios to the same channel, and start taking pictures. You can also trigger your camera remotely, just connect the appropriate remote camera cable. The PlusXe is also available as a 2 pack.

NOTE: the PlusXe does NOT include cables. We want to protect the environment and instead of providing multiple cables that you don’t use that will eventually end up in the landfill, you can order the specific cables you need for your equipment. If you need help figuring out what cables you need, please see our cablefinder or contact us for assistance.

Features include:

• 10 Standard Channels
• Easy to Use
• Remote Flash Sync
• Remote Camera Triggering
• Auto Relay Mode
• PocketWizard Compatible with either Legacy OR E Release firmware

See more details on the PlusX Product Page or usage instructions at the PocketWizard Wiki.

The PlusXe includes:
1 PlusXe radio
1 lanyard
Cables are sold separately

This is an FCC frequency radio which can only ship to an address within North America. 

The post FCC PlusXe Transceiver appeared first on PocketWizard.

This content is password protected. To view it please enter your password below:

Password:

The post Protected: Plus Ve Transceiver – FCC (2-Pack) appeared first on PocketWizard.

This content is password protected. To view it please enter your password below:

Password:

The post Protected: FCC Raven + Plus Ve Remote Kit (Copy) appeared first on PocketWizard.

This kit includes one Raven from Fusion TLC and two PowerMC2 Receivers for certain Paul C Buff strobes, including the Einstein, Celestial, and LINK.

Please see their product pages for details.

The post Raven and PowerMC2 Kit – FCC appeared first on PocketWizard.

What is the Raven?

The Raven is a revolutionary new universal lighting and camera trigger that uses the new PocketWizard E Release protocol. Using a Raven on your Nikon or Canon camera, the unit will pair perfectly with your PocketWizard radios. You can also add new products to your system as the Raven is also designed to work with Paul C Buff, Profoto, and Godox flashes. This revolutionary new product will let you trigger 2 different systems at the same time, while keeping all of the features that are available for both brands. The Raven takes the features of the FlexTT5/FlexTT6 and AC3, plus special timing functions from our legendary flagship MultiMAX radios, then adds some groundbreaking new features like trigger with sound and ping confirmation, and combines them all into one easy to use unit.

How do I use it with my PocketWizard Radios?

Pair your Raven with your FlexTT5/FlexTT6 radios and Nikon or Canon speedlights and take advantage of the new OLED full color touchscreen. You can select and adjust your lighting zones, then tweak power levels in either manual or TTL with a simple turn of the dial. The Raven has many of the features developed for the FlexTT5/FlexTT6 radios, including PowerTracking. With the touchscreen, those features are even easier to use than ever. Use the display to quickly find the perfect exposure, either in manual or TTL, then set the flash output level. Now you can adjust your aperture, ISO, or both, without having to worry about overexposing or underexposing your subject. The Raven will automatically adjust flash power levels to keep the same output you set. Find the perfect depth of field without having to readjust your flash every time! Take HyperSync to the next level with the Raven’s new SyncView feature! The built in light meter captures the flash profile and the touchscreen displays a never-before-seen representation of flash intensity over the length of the shutter cycle. Push your shutter speed to the limits by simply rotating the ring dial to optimize timing of your flash. Now you can see the exact perfect timing to get the fastest possible shutter speed with your strobe.

Can I just use it for flash or will it trigger remote cameras, too?

Remote camera triggering has never been more reliable than with the Raven. This new powerhouse has a built in noise meter so you can see a visual representation of Channel noise for each of the 32 flash Channels and the 80 camera Channels. The E Release technology already was unmatched for its range and reliability but the Raven kicks that up another notch. With built in SAW (surface acoustic wave) filter  – a first in the industry – noise is reduced dramatically. A custom designed antenna improves beam uniformity and range to make the Raven the most reliable transmitter possible. Once you find the best Channel to use, set up your remote Plus IIIe radios and use the new Signal Strength meter to verify that you’ve got the perfect setup. Your Plus IIIe can send a ping back to the Raven to let you know that there’s a strong signal or warn you that you might want to move your remotes. With the built in photo counter, your Plus IIIe will also send a message back to the Raven to let you know how many triggers it sent to your remote camera in a burst. With up to 8 remote Zones, you can capture every angle of the game without having to move! The Raven is fully compatible with any PocketWizard using the new E Release protocol. Add it to your existing PocketWizard system and take your photography to the next level! The Raven is available as an individual unit or in a kit with PocketWizard radios. For more detailed information, please see the Fusion TLC website.

Camera & Flash Compatibility:

The Raven is TTL compatible with Nikon or Canon cameras and can be used manually with any other camera brands. They are also available in either FCC  frequency (for FCC PocketWizard compatibility – North and South America) or CE (for CE PocketWizard compatibility – most of the rest of the world). Be sure to choose the specific model and frequency you need for your camera and PocketWizards.

The Raven can trigger 2 brands at once. It is compatible with PocketWizard (using the E Release firmware protocol), Profoto, Godox, and Paul C Buff receivers.

If you don’t see your camera or flash brand here, please tell us what equipment you have.

The post Raven by Fusion TLC appeared first on PocketWizard.

In crowded shooting environments, the number of available Channels may be limited but now you can install a PocketWizard Custom ID on your PocketWizard radios. With a Custom ID, your radio will be using a unique frequency, specifically assigned to you and your radios, allowing only you to trigger your remote flash or camera.

Custom IDs give you the confidence to know that your remote flash or camera can only be triggered by you and not any other photographer.  It is not a “private frequency.”  It is an exclusive code installed on top of an existing PocketWizard frequency.

Custom IDs can be installed on MultiMAX (usb version), MultiMAX II, Plus III, Plus IV, FlexTT5, and Canon FlexTT6 radios. The installation is performed only at PocketWizard’s home office (LPA Design) in Vermont. LPA Design maintains a database of Custom ID holders. Only you can get your Custom ID on future radios. You can order a new radio directly from us and we can add a Custom ID before shipping. Or if you would like to add a Custom ID to an existing radio, you can ship the unit to us for Custom ID installation.

Please note: you need at least 2 radios with Custom IDs and all radios that you want to work together must have the same Custom ID installed. For more information about Custom IDs, please see our wiki page here or contact us.

The post Custom ID appeared first on PocketWizard.

*IMPORTANT: You will need to purchase a remote camera cable (not included), specific to your camera model. See our cable finder or contact us at info@pocketwizard.com to determine which cable you need.

Watch this video to see just how easy it is to set up your own photobooth!

The post PocketWizard Photo Booth Kit appeared first on PocketWizard.

The post FCC PowerST4 Receiver appeared first on PocketWizard.

With a MiniTT1 or FlexTT5 on your camera, you can adjust power settings on your AlienBees or White Lightning flashes from the camera’s position. Gain even more control over your remote flashes when using an AC3 ZoneController on your camera’s radio.

You can also adjust flash power levels from the camera’s position using a Raven from Fusion TLC as the transmitter.

Includes RJ-14 connector cable. FlexTT5 sold separately. The AC9 will work with FlexTT5 radios using either Legacy or E Release firmware. See more about the AC9 AlienBees Adapter at the PocketWizard Wiki.

The post AC9 AlienBees Adapter – NIKON appeared first on PocketWizard.