PowerST4
powerst4 with elinchrom flash
powerst4 back view

FCC PowerST4 Receiver

$39.99

The PowerST4 Receiver can connect to an Elinchrom flash with a 5 or 7 pin external Skyport port.

It enables remote power control of Elinchrom RX flashes using PocketWizard ControlTL technology when using a MiniTT1, FlexTT5, or FlexTT6 as the transmitting radio. It can also be triggered by a MultiMAX or Plus radio as well.

The PowerST4 uses Legacy firmware, it cannot be upgraded to the E Release as this time.

NOTE: The PowerST4 has a 5 pin connection. If your Elinchrom has a 7 pin external port, you will need to use the Elinchrom 7 pin to 5 pin adapter.

SKU: 10191 Category:

Description

With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerST4 plugged into your Elinchrom RX flash, you can now adjust the flash power settings directly from the camera. Add the AC3 ZoneController and you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. Utilize PocketWizard’s unique features such as HyperSync and Optimized Rear Curtain Sync for maximum control of your lighting. See more about the PowerST4 at the PocketWizard Wiki.

Additional information

Specs

Frequency:

FCC/IC model: 340.00 – 354.00 North America

Channels:

52 Channels over 26 Frequencies – FCC/IC

Antenna:

2.7" (6.9 cm) rubberized

Mounting:

Five-pin remote socket

Zone Select Switch:

A-B-C

Status Indicator:

LED: Green, Amber, Red Status indications

USB:

USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground

Operating temperature:

Above -15° C (5° F) and below 50° C (120° F)

Storage
temperature:
(without battery)

Above -30° C (22° F) and below 85° C (185° F)

Construction:

High impact plastic, rubberized antenna

Power:

Receives power from attached flash

Dimensions:

3.6" (9.2cm) long x 2.2" (5.5 cm) wide x 1" (2.5 cm) tall

Weight:

.77 ounces (21.83 grams)

Included in the box:

PowerST4 Receiver, Quick Guide

RoHS Compliant

Requirements:

Must be used in conjunction with a MiniTT1 or FlexTT5 on camera for power control capability. May be paired with any PocketWizard transmitter or transceiver for simple triggering.
Compatibility

Style

Digital

Ranger*

300RX

1200RX

Ranger RX

600RX

2400RX

Ranger RX Speed

1200RX

Ranger RX Speed AS

Reviews

There are no reviews yet.

Be the first to review “FCC PowerST4 Receiver”

Your email address will not be published. Required fields are marked *

Customers Also Viewed

Replacement Cable for AC9 AlienBees AdapterAC9_Cable_0113385_PWPedal-with-PlusX_0916d9ba-edd2-46b8-ab71-785cc9d0d61c_grandePocketWizard Photo Booth Kit