Description
The HSFM3 cable allows you to trigger a flash that does not have a standard sync port. Simply slide your flash into the top shoe then connect the other end to your receiving PocketWizard and you are all set! The HSFM3 does not support TTL, you will need to set the flash to manual and adjust power on the flash itself. You should be able to sync the flash up to your camera’s X-sync speed.
This cable should work on virtually any flash capable of a single pin trigger, with a standard hot shoe, including Sony’s Multi Interface shoe.
The HSFM3 can also be used with a PocketWizard radio or a Raven from Fusion TLC. For example, if you would like to use a BT1 to trigger a Raven, you can connect the Raven to the HSFM3’s hot shoe. Use a female to female miniphone adapter, then connect the BT1 to the adapter.
If you break the hot shoe foot for the HSFM3, you can order a replacement bottom foot and install the new part yourself.
HSFM3 Specifications:
For connecting a PocketWizard radio (excluding the MiniTT1) to remotely trigger any electronic flash via a standard hot shoe.
Important note: this cable will only work with flashes that can use a single pin trigger to fire. It will not work if the flash requires full TTL communication. One example of this is the Nikon SB-700. Most flashes will work but if you have any questions, please contact us with your flash model to verify compatibility.
From: 1/8″ (3.5 mm) mono miniphone
To: standard hot shoe.
Cable length: 3′ (91 cm) straight cable
Part #: 11481
UPC #: 850386005089
