Ultimate Bike Selfie

We recently saw an amazing picture of a rider on a mountain bike trail in the UK. The photo was a selfie taken by the rider, James Vincent. He used a remote camera set up that was enabled by PocketWizard. I reached out to James to see if he could share how he set it up. 

The Bike Selfie – Born of Necessity

As well as getting paid to take photos of other mountain bikers, I spend a lot of my time testing bikes and kits for Singletrack Magazine and it’s pretty unfair to ask your riding buddies with regular jobs to sacrifice their precious weekend rides to muck around taking photos of various test kits. My need to take bike selfies is born out of necessity rather than some vain egotistical desire, or at least that’s what I tell myself anyway.

Don’t Use Cheap Triggers (You Might Crash)

This is actually the second remote trigger setup I’ve developed. Initially, I tried using cheap triggers, but they weren’t latching, and when you’re dropping in to a steep chute or jump, the last thing you want to be thinking about is moving your thumb to an awkward position and pressing a button repeatedly to get the shot.

Use the Right PocketWizard Cable

PocketWizard BT1/BT3 Cable

Fortunately, the PocketWizard Plus III has an input for an external trigger cable and using a button trigger cable (BT1 or BT3) with a little bit of tape to lock it “on”, I could send a continuous signal to the receiver unit that’s hooked up to the camera so that I was free to focus on riding the section cleanly.

 

The Selfie Set-up

You will need 2 PocketWizard radios set to the same channel. Put one on your camera and mount the other on your bike. Pop your camera on your trusty tripod of choice and frame the shot, then set your focus on the feature before switching the camera to manual focus mode (the last thing you’ll want after all this is to miss focus). Get in place and when you are ready, press the remote trigger, lock it down with the tape, and get your hands back to a comfortable position just before you drop into the feature. Once you hit the jump and clear the section, remove the tape.  Simples.

Use Relay Mode to Pop a Flash in your Selfie

Want to pop a flash? You will need a third PocketWizard radio attached to your flash with a flash sync cable. This Channel needs to be set 1 Channel higher than the other 2 radios in order to work. This is called Relay Mode.

PocketWizard Cable Inspiration

Inspired?  Our Button Trigger cable is just one of the specialty cables we offer to help you pull off your own epic selfie.