Remote Camera Action – For Basketball, it’s a Slam Dunk!

/in , /by

Mike Tedesco is a freelance sports and performance photographer based in Sammamish, WA. One of his favorite assignments is to photograph local High School sports – the action, the emotion, and the spirit of the crowd all make for memorable images.

Basketball Remote Camera Set Up

For basketball images, Mike likes to set up a remote camera behind the backboard to capture the exciting action as the players drive for the basket. We asked Mike to share how he uses a remote camera to kick it up a notch and capture images that go beyond your typical high school sports shots.

Setting up the Remote Camera – Safety First

When setting up a remote camera, Mike is always thinking safety first – he makes sure the equipment is secure and that his security has back up security! He always choses a spot where he can add a second magic arm/clamp and safety cables. In the words of Mike, “Never sacrifice safety for a different angle/shot.” For this game, he used (2) Manfrotto Variable Friction Magic Arms (one with camera bracket), (3) Manfrotto Super Clamps, (2) Impact Safety Cables, gaffers tape, and zip ties. In addition, since the camera was angled slightly downward, Mike used electrical tape to secure Cinefoil, an anti-reflective paper, underneath the lens to help guard against unwanted reflected light from the highly polished gym floor.

Pro-tip:  to minimize distraction to the players, electrical tape was chosen to secure the Cinefoil because it is black on both sides. Gaffers tape has a gray sticky side which when adhered to the backboard, could be distracting to the players.

Setting up the Remote Camera – Anticipate the Action

Pro sports photographers know that to capture the best images, you must anticipate the action – so it’s important to know the level of athletes that you are shooting.

Remote Camera Placement

For this high school game, Mike knew that the players were not dunkers. To best capture their action, he placed the camera higher up on the backboard and angled it down. If you are shooting a college or NBA level game, it would be good practice to bring the camera down and shoot more at rim level. In addition, the remote camera must be discreet, not distracting to the players, and far enough away from the backboard rectangle that identifies the sweet spot.

  • Setting up the remote camera.
  • Confirming camera placement.
  • Final set up from the back.
  • Final set up from the front.

Remote Camera Focus

Mike anticipated that he would be grabbing most of the action a bit below the rim. He put his remote camera, a Sony a9, in full manual focus with focus assist turned on and asked a colleague to stand on a 6 foot ladder that was placed in the lane a couple of feet away from the rim – to mimic a player driving the lane. He manually focused on his colleague and to ensure it wouldn’t move – he taped the focus and zoom rings down.

When to Set up the Remote Camera

Since Mike was dealing with a school and a busy gym, he had to do the bulk of the setup at 7 AM before school started at 8. After school, they had three games before the main event, the Varsity game, which started at 7 PM – 12 hours later! Mike did all the mounting, taping, and pre-focusing work before school, then went back to the camera during a short window before the games started to do a final safety, focus, and remote check. After the final check, he turned it all off and then turned it all back on just prior to the Varsity game.

Setting up the Remote Camera – Details, Details, Details

Remote Camera Settings:

Mike used a Sony a9 with a Sony FE 16-35 f/2.8 lens set at 20mm and f2.8. His shutter speed was 1/1000 which he recommends as a minimum shutter speed for the action. He would have preferred to shoot at f/4 to give him a little more depth of field flexibility, but as is the case with many high school gyms, the lighting was not great, so he opened it to f2.8 to keep his ISO at 6400.

PocketWizard Set Up

Mike placed a PocketWizard Plus III that was in Rx Mode on his remote camera and connected it with a PocketWizard remote camera cable (13369-S) to the camera’s remote camera terminal. He placed a second Plus III in Tx Mode in the hot shoe of his main camera – a Sony a9 II. Both radios were set to the same Channel/Zones.

Making sure the Camera Doesn’t Sleep

Mike set his Sony a9 sleep setting to the maximum setting of 30 minutes. Once he turned it on, he had to make sure that he triggered it at least every 30 minutes. which obviously isn’t a problem during the game. However, it can be a problem when you turn everything on and have a break between games or possibly an extended halftime.

Pro Tip: Using the MultiMAX II instead of the Plus III would give Mike the ability to wake the camera from sleep mode remotely and using the PTMM adapter would keep the camera awake constantly.

Battery Considerations

Mike has been very happy with his FZ100 battery on his camera by Sony. But he always shoots with the battery grip on all his cameras so that he can always have 2 fully charged batteries at the beginning of every event. But since his set up began 12 hours before game time, he turned the camera off after it was set up in the morning and then turned it back on just prior to the Varsity game for final testing.

Pro Tip: PocketWizard’s 13369-S remote camera cable for Sony’s camera has twin heads – one to plug into the camera and one USB head that can be plugged into a portable battery for even more battery life!

Getting the Shot – It’s all in the Preparation

  • Moment captured with handheld camera.
  • Moment captured with remote camera.

These two images are an example of a shot taken with his handheld camera which then also triggered the remote at the same time. As you can see in the handheld photo, there was a ref in the way and the shooter’s left arm blocking his face. The image from the remote camera got a clean view of the actual action.

The Best You Can Do is to Be Ready

Mike was disappointed in the lack of real action in front of his remote camera all game long. Despite his pre-game research, he felt the best drives happened on the left side of the hoop! Good example of Murphy’s Law in action! However, he still felt the time spent was incredibly valuable. Mike feels strongly that any time you can gain experience setting up for safety, framing, focus, and exposure is a win regardless of the images. Once the game starts, the action is out of your control so the best you can do is be ready.

Practice Practice Practice

One way to practice your remote camera skills is with a workshop. Summit Workshops and Sports Shooter Academy are examples of educational workshops that offer great hands-on experience in setting up remote cameras for sports. Have you attended a workshop that helped you with remotes?  Let us know in the comments! 

To check out more of Mike’s work, check out his website at www.reactionphotography.com and follow him on Twitter and Instagram.

E Release Test drive

/in , /by

Daniel Schenkelberg is a professional photographer based in California who has a passion for motorsports. His experience and dedication to the motorsports community is unmatched and gives him great insight for how to set up an epic shot for eye-popping shots whether it’s captured with a handheld or remote camera. Daniel likes to use remote cameras triggered by PocketWizard in order to get an unusual perspective close to the action while staying safe.

The Super Bowl of Off-Road Racing

In September, Daniel made a trip to capture the Crandon World Cup in Wisconsin – often called the “Super Bowl of short course off-road racing”. We gave him an early version of the E Release to see how it would perform.

Typical RF Challenges

Something that Daniel knows is that setting up remote cameras isn’t always foolproof – especially in a crowded and RF noisy environment like a racetrack. The radios communicate with radio waves and radio signal interference can impact the success of a remote camera set-up causing missed shots. A set up done early in the day, might not work later in the day once the environment fills with cars, people, and more electronic equipment. Some things that can interfere with signal transmission include:

  • Metal objects
  • Concrete or rock objects
  • High water-content objects (People and trees are mostly water!)
  • Electronic “noise” (In a racing scenario, there might be high voltage ignition systems that create electronic noise not to mention a sound system or television crew.)

The E Release is more Resilient to RF Interference

Because of the track set up, Daniel had to set up his remote camera a little further than he usually does – about 250 feet away – almost the length of a football field. The non-ideal conditions and the distance might trip up another radio trigger – but not PocketWizard. The truth is that the E Release upgrade has new technology that makes our PocketWizard radios particularly resilient to RF interference and noise.

Map showing location of Daniel (lower dot) and his remote camera 253 feet away.

More Shots than Ever

Using the E Release, Daniel came out of the event with some epic shots. His feedback was short and sweet.


“The radios were incredibly reliable. I came home with more shots than I have ever captured before.”

~ Daniel Schenkelberg

Thanks for taking it on a test drive Daniel! We don’t want you to miss a single shot!  You can check out more of Daniel’s work on his website and get your daily dose, be sure to follow him on Instagram @danielschenkelberg!

If you would like to learn more about how to set up your own remote camera, check out this quick video.

E Release now Available Worldwide!

Users of the PocketWizard Plus III and Plus IV can now benefit from the E Release! Check out our E Release landing page for more information.

Remote Camera Set-up

PocketWizard Photo Booth Kit

/2 Comments/in , /by

We’re so excited to introduce the PocketWizard Photo Booth Kit!  It’s a complete PocketWizard PlusX radio trigger kit that’s easy to set up and is a fun addition to any type of party of event. Whether you are a professional event photographer or a hobbyist who wants to bring a little fun to your next party, you are going to love it!

What’s in the PocketWizard Photo Booth Kit?

  • 3 PocketWizard PlusX Transceivers
  • 1 PocketWizard Pedal
  • Flash sync cable set
    • Locking PC sync cable
    • 3.5mm (1/8”) miniphone cable
    • 6.5mm (1/4”) phono adapter
  • PocketWizard G-Wiz Vault storage bag

You will need to purchase a remote camera cable separately which is specific to your camera. Check our Cable Finder to identify the one you will need. Use this kit in conjunction with your own camera and flash.

How to Set Up your Photo Booth

Connect the pedal to one of the PlusX radios. Elevate the PlusX at least 6-12 inches off the ground. Use a tripod or light stand for best results. Set it to Channel 1.

Put a second PlusX in your camera’s hot shoe and also set it to Channel 1. Connect the PlusX to your camera with the remote camera cable. Place the camera on a tripod or sturdy surface. For best results set the camera to manual focus and lock down the focus.

Connect the third PlusX to the flash via the appropriate flash sync cable. Set this PocketWizard to Channel 2. We used Channel 1 and Channel 2 in our example but you can use any Channel you like, just be sure to use the same Channel for the radios connected to the camera and foot pedal and use a Channel that is one higher on the PocketWizard connected to the flash. This is called Relay Mode.  



Use any type of photography light that you choose as long as it has a sync port for a flash sync cable.

The guests simply push the pedal with their foot to take their photo. Add a fun backdrop and props and you are good to go!

We set one up at our summer company picnic!  Good thing we’re not camera shy!

Click here to find the PocketWizard Photo Booth Kit on Amazon!

Hands Free Photography

/in , , /by

Have you ever wished you could step away from behind the camera when taking a photo? Sometimes you need an extra hand or another body to hold a reflector, flip a bride’s veil into the air or distract the baby or pet of the family. I’ts pretty hard to make funny faces or hold a squeaky toy when you’re holding a camera too! Now you can take a photo “hands-free” with PocketWizard when using a remote camera triggered with a foot pedal! 

Putting the PocketWizard Pedal to the Test

Kelly Schulze of Mountain Dog Photography

To test our new pedal, we reached out to a local Vermont animal portrait photographer, Kelly Schulze of Mountain Dog Photography. For the past 10 years, she has volunteered her time and talent to the local animal shelter, the Humane Society of Chittenden County (HSCC) in Burlington, VT. Her photos are used to promote animal adoptions by sharing them on the HSCC website and on social media. The photos are also displayed as art around the shelter and even inspire local artists to paint portraits of the animals.

Kelly goes to the shelter every Friday to take photos of the new animal arrivals. On the day we met with her, the shelter had gotten 40 new kittens – our work was cut out for us!

 

  •  

PocketWizard Pedal Set-Up

Kelly’s set up included a remote camera triggered with a PocketWizard Foot Pedal and two lights – one to light her subject and a second to light the backdrop with colored gels. For this, she needed 4 PocketWizard radios. Since we needed to fire the lights at the same time as the remote camera, Kelly needed to use PocketWizard’s unique Relay Mode functionality that is built into our radios. To do that, all Kelly had to do was set the Channel on her lights one Channel higher than the Channel used by her remote camera. This set up works with all PocketWizard transceiver radios.

  • Camera was set up on a tripod
  • One PocketWizard was set on her camera attached to the camera using a remote camera cable
    • Set on Channel 1
  • One PocketWizard was attached to the pedal via the miniphone port
    • Set on Channel 1
    • This PocketWizard was placed on a small tripod to keep it elevated off the floor for best radio transmission
  • One PocketWizard for each light
    • Each set on Channel 2 (one higher than the transmitting radios)

Taking Photos with the PocketWizard Pedal

Kelly put her camera on a tripod, set the focus and then got out from behind the camera. She moved the foot pedal so that she could get closer to the animals to engage them with toys and her hands. With the pedal, your hands are completely free so you can snap your fingers, shake a rattly toy, or use a treat for bribery to get the animals to pay attention to you. Then just step on the pedal and you’ve got the shot! It was also great for her to be closer to the animals to keep them keep them from jumping off the table and hiding!  After taking some with her foot, she moved the pedal on top of the table to get the animals to take a selfie.

The set-up was portable enough that we could move it to a smaller room where some kittens were housed. In this small space, Kelly appreciated not being stuck in a tight corner behind the camera.

“I love working with this pedal! I find that the minute I go behind the camera, the animal loses interest or will become alarmed by the scary looking lens which looks like a big eyeball. Working with the PocketWizard Pedal, I can stay closer to the animals to keep them relaxed and hold their attention. With only a few minutes to capture each animal, the pedal really helps me move quickly.”

~Kelly Schulze, Mountain Dog Photography

 


This setup is also perfect for taking photos of kids! Imagine being able to make a funny face and catching your 2 year old’s giggle? It’s perfect for candid moments in a photo booth as well, whether it’s at a wedding, family reunion, or work event. 

The PocketWizard Pedal is available directly through the PocketWizard Shop or on Amazon. You can also get a complete setup with our Photo Booth Kit! The package includes 3 PocketWizard PlusX radios, a Foot Pedal, and a G Wiz Vault to store everything in one place. Add your camera’s remote camera cable and you are ready to go!

Ultimate Bike Selfie

/in , , /by

We recently saw an amazing picture of a rider on a mountain bike trail in the UK. The photo was a selfie taken by the rider, James Vincent. He used a remote camera set up that was enabled by PocketWizard. I reached out to James to see if he could share how he set it up. 

The Bike Selfie – Born of Necessity

As well as getting paid to take photos of other mountain bikers, I spend a lot of my time testing bikes and kits for Singletrack Magazine and it’s pretty unfair to ask your riding buddies with regular jobs to sacrifice their precious weekend rides to muck around taking photos of various test kits. My need to take bike selfies is born out of necessity rather than some vain egotistical desire, or at least that’s what I tell myself anyway.

Don’t Use Cheap Triggers (You Might Crash)

This is actually the second remote trigger setup I’ve developed. Initially, I tried using cheap triggers, but they weren’t latching, and when you’re dropping in to a steep chute or jump, the last thing you want to be thinking about is moving your thumb to an awkward position and pressing a button repeatedly to get the shot.

Use the Right PocketWizard Cable

PocketWizard BT1/BT3 Cable

Fortunately, the PocketWizard Plus III has an input for an external trigger cable and using a button trigger cable (BT1 or BT3) with a little bit of tape to lock it “on”, I could send a continuous signal to the receiver unit that’s hooked up to the camera so that I was free to focus on riding the section cleanly.

 

The Selfie Set-up

You will need 2 PocketWizard radios set to the same channel. Put one on your camera and mount the other on your bike. Pop your camera on your trusty tripod of choice and frame the shot, then set your focus on the feature before switching the camera to manual focus mode (the last thing you’ll want after all this is to miss focus). Get in place and when you are ready, press the remote trigger, lock it down with the tape, and get your hands back to a comfortable position just before you drop into the feature. Once you hit the jump and clear the section, remove the tape.  Simples.

Use Relay Mode to Pop a Flash in your Selfie

Want to pop a flash? You will need a third PocketWizard radio attached to your flash with a flash sync cable. This Channel needs to be set 1 Channel higher than the other 2 radios in order to work. This is called Relay Mode.

PocketWizard Cable Inspiration

Inspired?  Our Button Trigger cable is just one of the specialty cables we offer to help you pull off your own epic selfie.

 

Remote Photography for High School Sports

/in /by

Our Sales Manager took a set of PocketWizard Plus IIIs to her son’s high school lacrosse game and ended up with a great example of using a remote camera to capture two very different perspectives at the same time. We asked her to write up a quick overview of her experience. This technique works with any two PocketWizard radios!

Find a Safe Location for a Unique Perspective

I enjoy taking pictures of my son’s lacrosse games and sharing them with the team. This particular game was taking place on a field we had never played on. It was unusual because it was on a bit of a plateau and as I was walking up to the observation area, I noticed that if I set up a low camera in one section, I could capture some photos as they ran past me with nothing but the sky in the background.

Remote Camera Set-Up

I set up my remote camera on a mini-tripod low to the ground with a wide angle lens. I set the remote camera to manual focus and guessed the focus point. For settings, I set the camera to f16 and aperture priority and my ISO was set at 800 which enabled the shutter to be fairly fast at 1/500th. I also set exposure compensation to +0.7 so that I wouldn’t end up with complete silhouettes against a bright sky.  I placed a PocketWizard Plus III on the remote camera and connected it to my camera with a PocketWizard remote camera cable. 

I set the other PocketWizard Plus III on my main body which was using a 200-500mm zoom and shot away! I was able to roam a little and still have my remote capture the wide-angle shots.

The two shots displayed may not have been taken at the same instant but they are close, as I shot about 10 frames to capture the action and then chose the best ones from each camera’s series.

Share your favorite remote shots and tag us! #whypocketwizard

Remote Camera Wide Angle Perspective

Zoomed in Perspective

Remote Cameras

/2 Comments/in /by

PocketWizard radios not only enable you to remotely trigger a flash, they also enable you to remotely trigger a camera. You don’t even have to be within view of your camera. With the right set-up, you could even be hundreds of feet away from your camera in any direction. And it works with all PocketWizard radios on every camera we’ve tested. The photo of our camera tree is our fun demonstration of this versatility!

The Possibilities are Endless!!

Here are a few ways photographers are using remote cameras:

  • Unique vantage points: Capture images from a dangerous or tight location – like racing events, behind soccer or in hockey nets.
  • Ultra-low perspective: This is great for sports photography to make athletes look even more powerful.
  • High perspectives. We have lots of users that are mounting their cameras in the rafters at sports arenas. You can also put your camera on a super high tripod or mount on a pole.
  • Wildlife photos: Put your camera in an inconspicuous location and stay safe by manually triggering from a distance.
  • Epic selfie: Got an amazing shot? Put yourself in it!
  • Photographing Children: Get out from behind the camera and engage with your playful subjects! Use a manual trigger and your subject will forget about the camera.
  • Street photography: Get out from behind your camera for some candid street photos.
  • Your own family photos: Easily put yourself in the family photo. No more hitting the button and running.
  • Capturing multiple perspectives with a single click. This one is BIG! Put one PocketWizard radio on your main camera and one on your remote. Every time you take a photo with your main camera, the remote camera is also taking a photo. It’s like having a second shooter without paying for one. Not only can you tell a more complete story with multiple perspectives, you can actually make more money. Here are some specific examples:
    • Finish Line: At a race finish line, have one camera with a wide angle capturing a wide view and have your main camera outfitted with a zoom to capture the details. Each time you click, your remote captures the wide view at the same time.
    • Wedding: Tuck a small mirrorless camera on silent mode hidden up front during the ceremony. Now you can stand out of the way and not invade the moment. Your remote will trigger and capture the critical moments from a different perspective in sync with your main camera.
    • Architecture Photos: That golden or blue hour window is short. Set up a remote camera to capture a different angle and get multiple perspectives with the same light.
    • Sports: You can capture that amazing play from different angles getting all the action and emotion you are looking for.

Tips for Remote Photography

 

You will need two PocketWizard radios. One PocketWizard radio to use as a transmitter (attached to your main camera or to hold in your hand to manually trigger) and one PocketWizard radio with the correct remote camera cable for each remote camera. Yes, you can have multiple remotes all linked to a single transmitter.

You will need a cable. The remote camera needs to connect to a PocketWizard radio with a remote camera cable. While we engineer our cables to be the best, accidents can happen! You may want to have a back up! Find your remote camera cables here.

Make sure your internal camera clocks are in sync on all your cameras. When you import into your editing application of choice, your images can sort by time.

Safety is first! Make sure your remote camera is secure and isn’t going to injure anybody or isn’t going to get damaged itself. You may need to ask permission before you set up. There are many tutorials on the web on how to secure your equipment to minimize accidents.

Video Tutorial

Watch this quick video on how to set up a remote camera.

 

How do You Use Remote Cameras?

Share your examples of photos using a remote camera and tag us! #PocketWizard #RemoteCamera

Behind the Scenes – Photographing the Super Bowl

/2 Comments/in /by

Last week we gave you a little insight into what goes into setting up remote cameras for the Super Bowl by speaking with photographer’s assistant Shawn Cullen. After the big event, we caught up with Shawn to see how it went and get some more detail about what it’s like to shoot one of the biggest sporting events in the world.

How Many Photographers Does it Take to Photograph the Super Bowl?

In short, the answer is a lot! And, it takes a lot to support them.  For USA Today Sports, there were 12 photographers, 10 runners, at least 8 editors and IT staff to make sure the network stayed up. The photographers were stationed as follows:

  • 2 photographers, one on each sideline
  • 2 photographers, one in each end zone
  • 4 photographers on the upper level, one level up from field
  • 1 photographer stationed in an upper level shooting position
  • 2 photographers roaming upper levels for action and beauty shots
  • 1 photographer dedicated to triggering the 6 remote cameras. (See last week’s blog for more information.)

When possible, the photographers are connected to the network to transfer images as soon as possible after they are taken.  When network connectivity is not possible, 10 runners are stationed to grab cards from the photographers and run them to the command center. The cards are placed in labeled bags and the runners are instructed to never take their hands off the cards. The command center was set up in an unused ticket office where editors review and select the best images to put on the wires.

Preparation is Key

On Super Bowl Sunday morning, USA Today had a staff meeting with everyone where they review the game plan and what to look for including players, coaches, half-time performers, singers, cheerleaders and the crowd. While this historic game did not have huge amounts of scoring action, there was still plenty to capture. While Shawn didn’t know exactly how many photographs were taken, he estimated around 75,000 or more.

Remote Trigger Radio Frequency and Interference

PocketWizard radios communicate wirelessly via radio waves. Just like any radio, they operate on certain frequencies and some frequencies are better than others. In North and South America (and some parts of Asia) we use the 340 – 354 MHz range because it is the least crowded frequency range for our class of wireless triggering devices. Other frequencies, used by our competitors, like the 2.4 GHz band, have many more interfering devices on them. These frequencies are getting more and more crowded as they are used by Bluetooth, Wi-Fi and wireless microphones. That makes the PocketWizard frequency the best because it is the least crowded which improves reliability and reduces the possibility of missed shots.

PocketWizard Best Practices to Minimize Radio Interference

While our frequency range is the most reliable, there are a few best practices that we can share to enhance reliability and Shawn has a few of his own tricks.   

  • Whenever possible, try to maintain a line of sight between the radios and keep the antennas parallel. While radio does not require line of sight, it does help dramatically.
    • When working in the catwalks of large stadiums, Shawn feels he gets the best reception by pointing the antennas slightly downward.
  • Make sure the radios are not near any large metal, concrete, or high water-content objects. People and trees are mostly water!
    • Hard to avoid any of this in a large stadium! To minimize interference, Shawn uses a long cable to keep the radios as far from the camera as possible and 2 of our non-metallic 4 inch mounting bars (MB4) screwed together to position them as far from the metal stadium supports as possible.
  • Do not mount the radios close to the ground – try to have them several feet above the Earth or building floors whenever possible.
    • In order to get that awesome low perspective, try and mount the PocketWizard above the camera if the camera is low.

Shawn swears by Long Range mode to extend the signal even farther. “Dead spots” have a number of causes, but the solution is usually the same: move the radio a few inches or feet away from the problem area.

Test, Test, and Test Again.

The Super Bowl 2019 was played at the Mercedes-Benz Stadium, arguably the best venue in the NFL. Some of its features include a 360-degree Halo Video Board that frames the roof opening – it is the world’s largest LED scoreboard at 63,000 square feet. Fans enjoy complete connectivity with 2,000 TV screens – even  embedded into bathroom mirrors and on the 101-foot-tall “Mega Column” three-dimensional video board. The venue has 1,800 wireless access points where 71,000 people can concurrently stream. Read more about the stadium here.

While all of these amenities make for a great fan experience, they can interfere with radio signals.  At the Super Bowl there is a frequency coordinator who manages all the frequencies to minimize interference.

Whether you are shooting your child’s pee-wee football game, or the Super Bowl, or best advice is to test, test and test again your set up and adjust where necessary. 

Want to learn more about radio waves?  Check out our Wiki!

Want to see some of the epic photographs taken by USA Today sport photographers?  Check out their gallery of their 100 best photos.

Super Bowl Photography!

/2 Comments/in , /by

Who’s ready for some football? Have you ever wondered what it’s like to photograph the biggest event in sports? We talked with Shawn Cullen who works as a photographer’s assistant with USA Today Sports and was setting up on Friday for Sunday’s big event. He explained how he sets up to captures this epic event.

Remote Camera Set-Up

Shawn has 6 remote cameras all set up in the catwalk aimed at key areas on the field.

  • Two at the 50 Yard Line – Both are aimed at the logo in the center to capture all the activity at the center of the field including the coin toss. One remote camera is equipped with a super wide lens to capture the end-to-end field overview including the scoreboard. Shots from this camera are helpful since capturing the scoreboard will give you an overview of the game at any time.
  • One at Each 25 Yard Line – Aimed at the roman numeral logo LIII.
  • One at Each End Zone – Pointing down the field poised to capture a field goal and the trophy presentation.

Custom IDs – A Premium Difference Only Offered by PocketWizard

PocketWizard Plus III radios are attached to each camera. The radios are tuned with a Custom ID which is a private digital code that ensures that only you can trigger your remote camera.  In crowded shooting environments, like the Super Bowl, Custom IDs give you the confidence to know that your remote camera isn’t going to be accidentally triggered by another photographer. While all the PocketWizards are set to Custom ID, they are programmed to different zones. PocketWizard Plus III units offer the ability use 4 different zones. All the cameras are connected to an ethernet cable so that the image editors can have fast access to the images to review and post online as quickly as possible.

Long Range Mode

The radios are all set to Long Range mode to extend the range. The Plus III Transceiver can trigger a remote up to 500 meters (1600 feet). An indoor football stadium is not an ideal shooting environment as there is a lot of noise. Using Long Range Mode nearly doubles the effective triggering distance in almost any environment. 

During the game, the remote cameras will be triggered by USA Today photographer and engineer James Lang. The cameras are all connected through a VLAN network and a video feed from the camera’s eye piece gives James the camera’s view. James remotely triggers the cameras when the action is right. 

On Friday, two days before the game, all the remote cameras are set and tested individually. In fact, USA Today photographers are required to participate in a “Burn Test” where the photographers fire all cameras at the same time to test the network. This is to simulate what might happen at any critical point in the game when everyone is trying to capture the action. This is done so that they can anticipate and correct any issues that might arise.

Shawn and James – good luck at the game, we can’t wait to see your photos!